Furuno 1834C-BB - Manual (Page 98)

3. PLOTTER OPERATION
3-35
1. Press the MENU key to open the menu.
2. Press the C: WAYPOINTS/ROUTES soft key.
3. Press the D: CREATE VOYAGE-BASED ROUTE soft key.
▲
001
WAYPOINTS
35
LENGTH
25.6 nm
002
WAYPOINTS
2
LENGTH
56.7 nm
003
WAYPOINTS
3
LENGTH
21.1 nm
004
WAYPOINTS
3
LENGTH
21.1 nm
SAVE
ROUTE
PUSH ENTER KNOB TO
SEARCH FOR
- --
RETURN E
NEW A
SELECT
ROUTE
B
1/20
Save route menu
4. Press the A: NEW soft key to show the new route window.
Note:
If you want to tack voyage-based points onto the end of an existing route, select
the route with the Trackball, then press the D: SELECT ROUTE soft key instead of the
A: NEW soft key. Then, go to step 6.
SAVE
ROUTE
Next consecutive route number
ROUTE NAME
0 0 6
COMMENT
USE FURUNO BACK TRACK FUNCTION
TO AUTOMATICALLY CREATE ROUTE
BY TIME OR DISTANCE.
CANCEL E
MANUAL C
BCKTRK
DIST
B
BCKTRK
TIME
A
Save route window
5. If required, you may change the route name and enter a comment.
6. Choose how to record points for your route, by time, by range or manual entry, by
pressing A: BCKTRK TIME, B: BCKTRK RANGE or C: MANUAL soft key as appropriate.
For manual entry, go to step 8. For BCKTRK TIME, BCKTRK DIST one of the following
displays appears.
0 0h01m
(When selecting BCKTRK TIME.)
0 0.1nm
(When selecting BCKTRK DIST.)
TIME INTERVAL DISTANCE INTERVAL
Displays for entry of time, distance interval