Furuno 1834C-BB - Manual (Page 16)

1. OPERATIONAL OVERVIEW
1-5
1.4 Adjusting Hue, Panel Illumination
You may choose the colors for the radar plotter, and overlay displays, and adjust panel
brilliance.
1. Press the
POWER/TX
key momentarily. A set of soft keys for adjustment of brilliance
and hue appear.
BRIDGE
FISH WP-002
34 ° 22. 3456'N 359.9 ° M TRIP NU
080 ° 22. 3456'E 19.9 kt 99.9 nm
BRILL
CONTST 12/
H-UP
3nm
LP
319. 9
°
M
359.9 ˚R
11.70
nm
+
Radar Display Plotter Display
BRILL
CONTST
16.0nm
(Blank label of softkey is not used) (Blank label of softkey is not used)
RETURN E
D
RADAR
STBY
HUE C
PANEL
BRILL
B
RETURN E
D
RADAR
STBY
HUE C
PANEL
BRILL
B
Brilliance adjustment soft keys
2. Press the C: HUE soft key to show the hue setting window.
HUE
▲
{ DAY
{ NIGHT
{ TWILIGHT
~ MANUAL SET
▼
Hue window
3. Operate the
Trackball
to select hue desired, referring to the table below. MANUAL SET
follows the color settings on the CHART DETAILS menu for the plotter and the RADAR
DISPLAY SETUP menu for the radar.
Night Day Twilight
Characters Red Black Green
Radar ring
Red Green Green
Radar echo Orange Multi Yellow
Background Black White Blue
Landmass (plotter) Orange*
Light-orange* Orange*
* = Beige and light-beige on C-MAP display unit.
Note:
When using the overlay screen, the own ship track will be hidden if the radar
background and own ship track are blue and the “MANUAL SET” hue setting is used. In this
case, set HUE to other position and then return to “MANUAL” to show the own ship track in
black.