FUJITSU 8000 SERIES - Manual (Page 73)

63
■ Maintenance of the mouse
Clean the surface using a soft, dry cloth. If the mouse ball does not roll smoothly, remove and
clean the ball as follows:
1 Remove the mouse bottom cover.
Turn the cover on the bottom of the mouse in the direction of the arrow to remove.
2 Remove the ball and clean with water.
Turn the mouse over to remove the ball. Clean the ball with water.
3 Clean inside the mouse.
Clean the inside, roller and bottom cover of the mouse with a cloth slightly wet with water.
4 Replace the ball and bottom cover.
Replace the ball and bottom cover after completely drying the ball and inside of the mouse.
Roller
Ball
10-DP8 (61-66) 3/2/01, 2:33 PM 63