FUJITSU FTP-641MCL301 - Manual (Page 2)

2
FTP-641MCL301/302
■ DESIGNATION
Part number
Front paper insertion type
Rear paper insertion type (supports thick paper)
FTP-641MCL301
FTP-641MCL302
FTP-641CT001
FTP-621DCL012
FTP-621CU102
FTP-633GA101
Item
Printer mechanism
Micro Controller Unit
Gate Array
LSI
Interface board
Cutter
Printing method Thermal-sensitive line dot method
Dot structure 832 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 104 mm
Number of columns 69 columns/line (maximum)—Alphanumeric KANA
Maximum printing speed 800 dot lines/s (100 mm/s) maximum
JIS ANK : 128 International characters : 130
Character types Semi-graphic : 63 ASCII small characters : 31
Download : 384
24
×
12 dots, (3.0
×
1.5 mm), 69 columns
32
×
16 dots, (4.0
×
2.0 mm), 52 columns
24
×
24 dots, (3.0
×
3.0 mm), 34 columns
32
×
32 dots, (4.0
×
4.0 mm), 26 columns
Interface 1) Centronics standard 2) Bus interface* 1
Cutting method Guillotine method
Cutting type Full-cut or partial cut (command set)
Minimum cut length 20 mm
Paper thickness 65 to 150
µ
m
■ GENERAL SPECIFICATIONS
Specifications Item
Character composition, dimensions (H
×
W),
Number of columns (standard)
Cutter
(Continued)