FieldServer Genisys FS-8700-133 - Manual (Page 7)

FS-8700-133 Genisys Manual Page 7 of 13
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
5.2 Client S ide Node Descriptors
Section Title
Nodes
Column Title
Function Legal Values
Node_Name Provide name for Node
Up to 32
alphanumeric
characters
Node_ID VHLC station address of physical Server Node 1-255
Protocol Specify protocol used Genisys
Connection
Specify which port the device is connected to the
FieldServer
P1-P8
1
Genisys_Check_Controls*
If OFF, the FieldServer configures VHLC to apply controls
from the FieldServer without verification.
If ON, the FieldServer configures VHLC to verify controls
supplied by the FieldServer before applying.
OFF, ON
Genisys_Intra_Poll_Delay*
Specify time, that FieldServer should wait before sending
ACK or Execute message after receiving the last character of
response from VHLC.
0.010s, 0.025s etc
Example
// Client Side Nodes
//
Nodes
Node_Name , Node_ID , Protocol , Port , Genisys_Check_Controls , Genisys_Intra_Poll_Delay
Genisys_01
, 1 , Genisys , P1 , ON , 0.01s
Genisys_02 , 2 , Genisys , P1 , - , 0.01s