FieldServer Genisys FS-8700-133 - Manual (Page 3)

FS-8700-133 Genisys Manual Page 3 of 13
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
1 GENISYS DESCRIPTION
The Genisys driver allows the transfer of data to and from devices over RS-232 Genisys protocol. Vital Harmon
Logic Controller (VHLC) supports Genisys protocol. IM-188 VHLC GENISYS SOFTWARE MANUAL 100188-008
AB0.PDF is the basis of the Genisys driver. The FieldServer can be configured as a Client. Limited Server side
functionality has been implemented for FieldServer’s quality assurance requirements only.
Max Nodes Supported
FieldServer Mode Nodes Comments
Client 1 Only 1 virtual client per port allowed on multidrop systems.
Server 255 Maximum device addresses pollable by Client – protocol limitation.
2 DRIVER SCOPE OF SUPPLY
2.1 Supplied by FieldServer Technologies for this driver
FieldServer Technologies PART # Description
FS-8915-10
UTP cable (7 foot) for RS-232 use
FS-8917-04 RJ45 to DB25F connector adapter
FS-8700-133 Driver Manual.