FUNAI SV2000 WV20V6 - Manual (Page 76)

76 EN
VCR VCR VCR
First:
VCR VCR
Fast forward:
When the unit is in stop mode, press [F.FWD D] to fast forward the videotape.
Rewind:
When the unit is in stop mode, press [REW E] to rewind the videotape.
To cue or review picture during playback (Picture Search):
Press [REW E], [F.FWD D] during playback.
Press it again and the unit will search in super high speed. (in the SLP mode only)
To freeze the picture on TV screen during playback (Still Mode):
Press [PAUSE F]. Each time you press the button, the picture will be
forwarded by one frame.
If the picture begins to vibrate vertically during the Still Mode,
stabilize the picture by pressing [CHANNEL L / K] on the front panel
or [CH K / L] on remote control.
If the picture is distorted or rolling vertically, adjust the vertical hold
control on your TV, if equipped.
Counter Reset:
Press [CLEAR].
To playback in slow motion:
Press [SLOW
] during playback or the Still Mode.
If the noise bars appear on the TV screen, you can reduce it by
pressing [CHANNEL L / K] on the front panel or [CH K / L] on remote
control.
Automatic Rewind:
When a videotape is played or fast forwarded to its end, the videotape will
rewind to the beginning, stop and eject itself.
When you playback a videotape recorded in Hi-Fi stereo:
Press [AUDIO] on the remote control to select Hi-Fi or MONO for playback
sound mode.
• If you have connected a stereo TV to this unit, select “HIFI”.
• If you have connected a monaural TV to this unit, select “MONO”.
xxxx
VCR functions
Other operations
Note
• Still/Slow/Pause mode will be
automatically cancelled after
5 minutes to prevent damage
to the videotape and the
video head.
• To return to playback from
the Picture Search/Still/Slow
mode, press [PLAY B].
Search (cont’d)
HIFI Your Selection
Type of recorded tape
non Hi-Fi tapes
Hi-Fi tapes
recorded in
Hi-Fi stereo
Hi-Fi tapes
recorded second
audio program
Hi-Fi tapes
recorded main
audio program
MONO
Monaural
L+R
Main audio
program
Second audio
program
Monaural
R-channel L-channel
R
Main audio
program
Second audio
program
Monaural
L
Main audio
program
Second audio
program
Time search
Note
• Index search and Time search are not available during recording.
• Press [STOP C] to stop the search.
• If the end of the videotape is reached during Search, this unit will
cancel the search and rewind the videotape.
VCR VCR VCR
This feature allows you to go to a
specific point on a videotape by
entering the exact amount of time
you wish to skip in order to reach
the point.
First:
VCR VCR
1
Press [SEARCH] repeatedly so
that the TIME SEARCH menu
appears.
2
Using the Number buttons,
enter your desired time to skip
within 30 seconds.
You can set the time up to 9:59.
3
Press [REW E], [F.FWD D] to
start time search.
If you want to go in the forward
direction, press [F.FWD D].
If you want to go in the reverse
direction, press [REW E].
After time search, the unit will play
the videotape automatically.
TIME SEARCH
2:50
STOP
STANDBY-ON
TIMER SET TIMER
PREV NEXT
OPEN/CLOSE
SPACE
1 2 3
4 5 6
7 8
0
9
CH
VIDEO/TV
SLOW
PAUSE
.@/: ABC DEF
GHI JKL MNO
PQRS
REC
DISPLAY
TUV WXYZ
DVD REC
REC MODE
SEARCH
VCR
SETUP
CM SKIP
RETURN DISC MENU TITLE
RAPID PLAY
CLEAR
OK
PLAY
1
2
3