FRIGIDAIRE 297281400 - Manual (Page 7)

7
Upright Models
Figure 3
Standard Electronic
Temperature Control
Figure 2
SETTING THE TEMPERATURE CONTROL
To keep the
temperature setting
from being accidentally
changed, the control
may be locked. This
is done by pressing
“Alarm Reset” for 3
seconds. “L” will then
appear on display. To
unlock the control,
press “Alarm Reset”
for 3 seconds. For the
first second, “U” will
appear, and then the
current temperature
will appear.
• Temp Alarm
This feature is
designed to provide
a warning if the
inside temperature
exceeds 23°F.
“HI TEMP”
feature operates
on household
electricity. It
will not function
if household
electricity is
interrupted.
• When the freezer
is initially plugged in, the red “HI TEMP”
indicator will be on and the buzzer will
sound. The indicator light will stay on until
the freezer temperature is below 23°F. To
silence the buzzer, press the ALARM RESET
button.
• If a malfunction causes the temperature
inside the freezer to rise above 23°F, the
“HI TEMP” light will turn on and the buzzer
will sound. The buzzer will sound every five
minutes until the freezer temperature is
below 23°F. To silence the buzzer, press the
ALARM RESET button.
• Door Ajar Alarm
This feature provides a warning if the door
is open for more than five minutes. There
will be a beep every five seconds and the
“Door Ajar” indicator will light up. Press
“Alarm Reset” to turn the alarm off. The
“Door Ajar” indicator will remain lit until the
door is closed. If the door remains open for
15 minutes or more, the interior lamp will
turn off.
Should an “E” appear on display, contact your
authorized service technician for repair. Until
changes are made, freezer will continue to run.
Deluxe Electronic Temperature Control
(some upright frost free models)
Refer to the Electronics Control Guide supplied
when you purchase a deluxe electronic upright
model. See Figure 3 for deluxe electronics
control panel.