Fujitsu Siemens Computers 5110 FA - Manual (Page 24)

Colour monitor 5110 FA
22 - English A26361-K872-Z100-1-5E19
Monitor port DVI-D
1
9
17
C1
C5
C2
C4 C3
Pin Meaning Pin Meaning Pin Meaning
1 TMDS Data2- 11 TMDS Data 1/3
Shield 21 NC
2 TMDS Data2+ 12 NC 22 TMDS Clock Shield
3 TMDS Data 2/4
Shield 13 NC 23 TMDS Clock-
4 NC 14 +5V Power 24 TMDS Clock+
5 NC 15 Ground
6 DDC Clock 16 Hot Plug Detect C1 Analogue Red
7 DDC Data 17 TMDS Data0- C2 Analogue Green
8 NC 18 TMDS Data0+ C3 Analogue Blue
9 TMDS Data1- 19 TMDS Data 0/5
Shield C4 Analogue Horizontal
Sync
10 TMDS Data1+ 20 NC C5 Analogue Ground
Trouble shooting
Should an error occur, first check the following points. If the distortion is still not eliminated, the
monitor should, if possible, be checked on another computer and/or with another data cable.
If you are unable to solve the problem, please inform our Help Desk.
The display is too small or not centred
The monitor recognises an undefined mode (see "Technical data").
Ê Adjust the position and the size of the display and save your settings (see "Operation of the
monitor").
No display (power indicator does not light)
Ê Check whether the monitor is switched on.
Ê Check whether the power cable on the monitor is connected correctly.
Ê Check whether the mains socket is live.