Fujitsu Siemens Computers 5110 FA - Manual (Page 17)

Colour monitor 5110 FA
A26361-K872-Z100-1-5E19 English - 15
Setting colour temperature and colours
Calling the COLOR ADJUST setting window
Selecting the colour temperature ( COLOR TEMPERATURE )
The "warmth" of the screen colours is set using the colour temperature.
The colour temperature is measured in K (= Kelvin). You can select from
9300 K, 6500 K, 5400 K and 5000 K.
Setting user-defined colours ( USER COLOR TEMPERATURE )
In the user-defined setting you can change the colour ratios of the basic
colours (red, green, blue) as required (selection with the B button).
Adjusting the intensity of the grey levels (Gamma correction) ( GAMMA )
This function allows you to optimise the display of multimedia
applications (white, red, green, blue).
Setting functions in the "ADVANCED MENU" menu
Calling ADVANCED MENU setting window
The functions SCALING and SHARPNESS are only made available if your monitor is
not set to the maximal resolution (1600x1200).
Setting scaling ( SCALING )
FILL ALL = Switch on the full-screen mode. The display area is stretched
to the full picture size (1,280 pixels, side ratio 5:4). As a result, the
display may appear distorted.
FILL ASPECT RATIO = Switch on the proportional full-screen mode: The
display area is expanded to the maximum picture size while maintaining
the side ratio (either full picture width or full picture height).
1:1 = full picture size (depending on the resolution)
Adjusting the picture quality in case of interpolation ( SHARPNESS )
This function allows you to set the sharpness of the interpolation filter.
Thus the display can be optimised for pictures or texts.
Displaying the monitor information ( INFORMATION )
This function allows you to display e.g. the current resolution and refresh
rate.