Fujitsu Siemens Computers 5110 FA - Manual (Page 15)

Colour monitor 5110 FA
A26361-K872-Z100-1-5E19 English - 13
To set the OSD menu, perform the following steps:
Ê Briefly press the A button to activate the OSD menu.
The main menu appears on the screen with icons for the setting functions.
C O N T R A S T / B R I G H T N E S S
I M A G E A D J U S T
C O L O R A D J U S T
S E T U P M E N U
M E M O R Y R E C A L L
A D VA N C E D M E N U
A U D I O M E N U
: E X I T A : S E L E C T B
The last icon set is marked (in this case
CONTRAST / BRIGHTNESS ). At the bottom of the
OSD menu each button's function is displayed.
Ê If necessary, press the 6 or 5 button to
mark another icon (e.g. IMAGE ADJUST ).
Ê Press the B button to select the highlighted
icon.
The corresponding setting window (here: IMAGE ADJUST ) is displayed.
I M A G E A D J U S T
AU T O T U N E
H . / V. P O S I T I O N
H . S I Z E
P H AS E
Z O O M
: E X I T A : S E L E C T B
The first icon ( AUTO TUNE ) is highlighted.
Ê If necessary, press the 6 or 5 button to
mark the next icon.
Ê Press the B button to select the highlighted
icon.
The icon's colour changes.
Ê Press the 6 or 5 button to adjust the
selected function.
Ê Press the A button to exit the function.
The icon's colour changes.
Ê Press the 6 or 5 button to mark another
symbol or press the A button to return to the
main menu.
All changes are stored automatically.
If you want to change other settings, select the corresponding function from the OSD main menu. All
possible adjustments of the main menu are described in the following.
i
The OSD menu for analogue monitor operation is described in the following. During digital
operation some functions are not available, as they are not required due to the digital
transmission technology used.