FUJITSU MB39A104 - Manual (Page 34)

MB39A104
34
■ USAGE PRECAUTIONS
• Printed circuit board ground lines should be set up with consideration for common impedance.
• Take appropriate static electricity measures.
• Containers for semiconductor materials should have anti-static protection or be made of conductive material.
• After mounting, printed circuit boards should be stored and shipped in conductive bags or containers.
• Work platforms, tools, and instruments should be properly grounded.
• Working personnel should be grounded with resistance of 250 kΩ to 1 MΩ between body and ground.
• Do not apply negative voltages.
• The use of negative voltages below −0.3 V may create parasitic transistors on LSI lines, which can cause
malfunction.
■ ORDERING INFORMATION
■ EV BOARD ORDERING INFORMATION
■ RoHS COMPLIANCE INFORMATION OF LEAD (Pb) FREE VERSION
The LSI products of Fujitsu Microelectronics with “E1” are compliant with RoHS Directive , and has observed
the standard of lead, cadmium, mercury, Hexavalent chromium, polybrominated biphenyls (PBB) , and polybro-
minated diphenyl ethers (PBDE) .
The product that conforms to this standard is added “E1” at the end of the part number.
■ MARKING FORMAT (Lead Free version)
Part number Package Remarks
MB39A104PFV-
❏❏❏E1
24-pin plastic SSOP
(FPT-24P-M03)
Lead Free version
EV board part No. EV board version No. Remarks
MB39A104EVB Board Rev. 1.0 SSOP-24P
INDEX
3
XXXX
XXX
E1
1 9A 04
Lead Free version