FujiFilm FinePix E500 - Manual (Page 35)

68 69
Settings
4
1
2
3
4
1 Press the “MENU/OK” button to display the
menu on the LCD monitor.
2 Press “d” or “c” to select “F” OPTION and
then press “a” or “b” to select “SET-UP”.
3 Press the “MENU/OK” button to display the
SET-UP screen.
0 1
0 1 0 2
0 2
SET-UP
● ! Always turn the camera off when replacing the batteries.
Opening the battery cover or disconnecting the AC power
adapter without turning the camera off may cause the camera
settings to revert to the factory default values set at shipment.
Press “d” or “c” to move to options 1 to 4.
After you have changed the settings, press the
“MENU/OK” button to confirm the changes.
1 Press “a” or “b” to select a menu option.
2 Press “d” or “c” to change the setting.
Press “c” for “FORMAT”, “DATE/TIME”, “TIME
DIFFERENCE”, “DISCHARGE” or “q RESET”.
F USING THE SET-UP SCREEN
0 3
1 1 Set the Mode switch to “q” or “w”.
2 Press the “MENU/OK” button to display the
menu on the LCD monitor.
2
3
1 Press “d” or “c” to select “F” OPTION and
then press “a” or “b” to select “fi LCD” or
“VOLUME”.
2 Press the “MENU/OK” button.
◆
SET-UP menu options
◆
The options available in the F menu vary depending on whether the “ q ” or “ w ” mode is selected.
1 Press “d ” or “c ” to adjust the monitor
brightness or the volume.
2 Press the “MENU/OK” button to confirm the new
setting.
0 1
0 2
0 1 0 2
0 1 0 2
h “ B , m , , , . , / , N , M ,
< , > ” Photography mode
✽ In N, M, <, >
h “ r ” Movie mode h “ w ” Playback mode
fi ADJUSTING THE MONITOR BRIGHTNESS /
VOLUME
4
Settings