FujiFilm FinePix E500 - Manual (Page 32)

63
Advanced
Features
3
1 1 Set the Mode switch to “w”.
2 Press the “p” button.
0 1 0 2
2 1 Press “d” or “c” to select “U” DPOF ALL RESET.
2 Press the “MENU/OK” button.
3 A message appears.
To reset all the DPOF settings, press the
“MENU/OK” button (or “p” button).
0 1 0 2
62
Total number of prints
Total number of prints
Setting for that frame
4 1 Press “d” or “c” to display the frame (file) for
specifying DPOF settings.
2 Press “a” or “b” to set a value up to 99 as the
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
To specify more DPOF settings, repeat steps 1
and 2.
● ! Prints of up to 999 image frames (files) can be ordered on the
same xD-Picture Card.
● ! DPOF settings cannot be specified for movie.
5 Always press the “MENU/OK” button (or “p”
button) after the settings are completed.
Pressing the “BACK (DISP)” button, cancels those
settings.
Pressing the “BACK (DISP)” button while choosing
the settings will cancel all current settings. If there
were previous DPOF settings, only the
modifications are cancelled.
0 1 0 2
◆
Canceling a frame
◆
To cancel the DPOF setting for a frame (file) you
have specified (cancel frame), perform steps
1 to 3
and then:
1Press “d” or “c” to select the frame (file) with
the DPOF setting you want to cancel.
2Set the number of prints to 0(zero).
To cancel the DPOF setting for another frame (file),
repeat steps 1 and 2.
Press the “MENU/OK” button (or “
p ” button) to
complete the settings.
U DPOF ALL RESET
p PHOTO MODE PLAYBACK u DPOF SET FRAME
p PHOTO MODE PLAYBACK