FUJITSU FTP-629DCL014R - Manual (Page 3)

3
FTP-629MCL103/383-R
(Continued)
Item Specifications
Part number FTP-629MCL03/05-R FTP-629MCL383#0/#02-R
Power supply For head 24 VDC ±5%, .4A (3A) (24V, 25% printing ratio)
For printer motor 24 VDC ±5% A maximum
For cutter motor --- 24 VDC ±5% A maximum
For logic 5 VDC ±5% 0.2A maximum
Dimension
W x D x H
Printer mechanism 82.5 x 40.5 x 20.5mm ---
Printer mechanism with cutter --- 90.5 x 70.3 x 37.4mm
Interface board (DCL/DSL) 70 x 60 x 2.6mm
Interface board (DSL00) 95. x 73.5 x .6mm
Interface board (DSL300) 77 x 50 x 2.5mm
Weight Printer mechanism Approximately 00/0g ---
Printer mechanism with cutter --- Approximately 290g
Interface board (standard speed) Approximately 25g
Interface board (medium speed)
Approximately 45 g
Interface board (high speed) Approximately 20g
Life Head Pulse durability: 00 million pulse/dot (using Fujitsu's standard driv-
ing method)
Wear resistance: 00km (at 2.5% print ratio)
Cutter --- ,00,000 cuts minimum
Platen 5,000 times (open/close)
Environmental
conditions
Operating temperature -0ºC to +60ºC (guarantee) 0ºC to +50ºC
Operating humidity 20 to 85% RH (no condensation)
Storage temperature -40ºC to +70ºC -20ºC to +60ºC
Storage humidity 5 to 95% RH (no condensation)
Detection Head temperature By thermistor
Paper out/Mark detect By photointerruptor
Head release By slide switch
Recommended
thermal
sensitive paper
High sensitive paper TF50KS-E4 (Nippon paper)
Standard paper TF60KS-E2 (Nippon paper), FTP-020P004 (58mm)
PD50R (Oji paper), FTP-020P070 (58mm)
Medium life storage paper TF60KS-F (Nippon paper), FTP-020P002 (58mm)
PD70R (Oji paper)
P220VBB- (Mitsubishi paper)
PD60R-N (Oji paper)
Long life storage paper AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)