Fisher & Paykel Smart Drive GWLO8 - Manual (Page 18)

16
CUSTOMIZING THE WASH
CYCLES
All the wash cycles can be partially customized. You
can program your Smart Drive to automatically set
the wash options and agitation time you want, when
you select each wash cycle.
For instance, you may want to set the Regular cycle
to cold wash or set Heavy Duty to include a soak.
Once you have programmed the wash cycles, your
Smart Drive will remember them, even when it is
unplugged.
TO CUSTOMIZE THE WASH CYCLES
1. Press the wash cycle you wish to customize and
hold down for 2 seconds.
2. The machine will give two quick beeps and the
wash cycle light will flash telling you that you are
in the programming mode.
3. Select your wash options.
4. If you would like to decrease the agitation time,
press ADVANCE until the required number of
green lights remain. (Each green light in the wash
progress represents 3 minutes of agitation.)
To increase the agitation time keep pressing
ADVANCE until all the green lights are displayed
again.
Note: On Heavy Duty and Wool you can only
decrease the wash time.
5. Press the wash cycle again to store your
customized cycle.
To change your customized wash cycle repeat these
steps.
Note: The customized wash cycles cannot be set to
start at the rinse or spin stage.
1133 LDY Use & Care (USA) 16/5/01 3:34 PM Page 18