FujiFilm 90 - Manual (Page 24)

24
2
2
1
1
Check the film check window to make sure no film is loaded into the camera.
∗
Never open the camera back while film is in your camera.
Do not load a film immediately before inserting the battery.
∗
When the battery is replaced immediately after loading a new film, the camera may not recog-
nize that a film has been loaded. (
→ p.59)
1 To load the film, slide camera back lock in the direction of the arrow as shown in
the picture at left.
2 Open the back as shown.
∗
Never apply excessive force when opening or closing the camera back.