Firex FADCQ - Manual (Page 5)

5
• Latching LED: After the alarm condition is
over, helps identify which unit in a linked
series triggered an alarm. The Latching LED
continues to identify the trigger alarm until it is
manually reset by pressing the Smart Button.
Can also help you identify a malfunctioning
alarm in a series.
• Dual Ionization Smoke Chamber:
Meets or exceeds UL/ULC standards.
Generally faster at detecting fast-burning fires.
• Firex CO Sensor System: Improves safety.
Sensor system reacts to CO most like the
human body. Effectively simulates the gradual
poisoning (accumulation) and detoxification of
COHb in the blood stream.
• Smart Button: This one button is all you need
to test the unit and operate features like Quick
Quiet
™ , Smart Quiet ™ , and reset the Latching
LED. It automatically activates the proper
response to the alarm condition at the time
you press it.
• Replacement: This combination Smoke/CO
Alarm can be used as a replacement for all
Firex Smoke and CO* alarms without addition-
al wiring. Lets you easily upgrade from individ-
ual smoke or CO alarm to a combination unit.
*(Existing CO alarms may need to be replaced
in interconnected systems.)
• Product Family Styling: All Firex alarms have
a clean, consistent look in the home.
Installation Features/Benefits:
• Front Load Battery Compartment: Fast,
safe and convenient! Change the battery with-
out removing the alarm from the mounting
bracket. Saves installation time, too.
• 9V Alkaline Battery: Included with the alarm.
UL/ULC Listed to provide a minimum of one
year battery back-up and battery operation.
With AC power applied, battery can be
expected to last up to five years.
• Powerlink Tab: Keeps battery power from
draining between alarm installation and
homeowner move-in.
• Dust Cover: Protects the sensors from dust,
dirt, fumes, or other common construction
contaminants—which can contribute to false
alarms—until the job is complete.
• Shared Bracket and Wire Leads: Lets you
replace or move alarms around quickly and
easily using the standard Firex smoke
connector and mounting bracket.
Interconnect Features/Benefits:
• Interconnect: Linking units in a series broad-
ens the coverage in a home, and can give resi-
dents extra time to respond to the alert.
• Smart Interconnect: Saves cost of additional
wiring by allowing smoke and CO alarms to
share a single, smart interconnect wire.
Installations can be done using just three
wires: hot, neutral, and interconnect.
• DC Interconnect: Where allowed by code,
lets you interconnect units which operate on
battery power only in a cost-effective way.
Interconnected units can provide earlier
warning of a dangerous situation.