FUJITSU FTP-623MCL400 - Manual (Page 2)

2
FTP-623MCL400/FTP-623DCL002
Printing method Thermal-sensitive line dot method
Dot structure 384 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 48 mm
(1) Single density Standard mode HS mode 1. to 3.
HQ mode
Printing mode Reduced mode HS mode 1. to 3.
HQ mode
(2) Double density mode
Approximately 23 character lines/s (460 dotlines/s = 57.5 mm/s)
[1ply, 8 columns of “H”, double density, 7.2 V, 1/10” line returns]
Approximately 16 character lines/s (416 dotlines/s = 52 mm/s)
[1ply, 12 columns of “H”, double density, 7.2 V, 1/8” line returns]
JIS ANK : 128 ASCII : 31
Character types Semi-graphic : 36 International characters : 130
Special : 30 Download : 8
Character grade mode Standard character (12
×
6 dot font)/High grade character (16
×
8 dot font)
Single density standard : 24
×
12 dots, (3.0
×
1.5 mm), 32 columns
32
×
16 dots, (4.0
×
2.0 mm), 24 columns
Single density reduced* 1 : 24
×
12 dots, (3.0
×
1.5 mm), 34 columns
32
×
16 dots, (4.0
×
2.0 mm), 26 columns
Double density : 16
×
8 dots, (2.0
×
1.0 mm), 48 columns
Interface 1) Centronics standard 2) Bus interface* 2
■ DESIGNATION
■ GENERAL SPECIFICATIONS
Specifications Item
Part number
FTP-623MCL400 *
FTP-623DCL002
FTP-623CU001
FTP-633GA101
Item
Printer mechanism
Interface board
Micro Controller Unit
Gate Array
LSI
*: Rear paper insertion type is available: FTP-623MCL402
Maximum printing speed
Character composition, dimensions (H
×
W),
Number of columns (standard)
(Continued)