FEIN Power Tools FMM 250 - Manual (Page 8)

8
M ULTI M ASTER FMM 250 / M ULTI M ASTER FMM 250 Q EN
Intended use of the power tool.
This power tool is intended for commercial
or private use for dry sanding of small sur-
faces, corners and edges, for scraping, for
sawing thin steel sheet, wood and plastic
components using the application tools and
accessories recommended by FEIN. With the respective accessories, the power
tool can also be used for polishing, cutting,
separating and as a rasp.
Operation of the power tool off power generators.
Operate the power tool only off
a.c. generators with sufficient power
output that do not have any distortion of
the voltage curve.
Operating the power tool
off power generators
whose no-load speed exceeds the voltage
value on the type plate of the power tool is
prohibited.
Symbols.
WARNING
Symbol Term, meaning Explanation
➤ Action Action to be taken by the user
Do not touch the saw
blade. Danger of sharp application tools moving
back and forth.
General mandatory sign Follow the instructions in the adjacent text!
Read documentation Be absolutely sure to read the enclosed
documentation such as the Instruction
Manual and the General Safety Instructions.
Use eye-protection Use eye-protection during operation.
Wear ear protection Use ear protection during operation.
Use dust mask Use a dust mask during operation.
Use protective gloves Use protective gloves during operation.
It is forbidden to dispose
of the product in the
unsorted household
waste. Worn out power tools and other electro-
technical and electrical products should be
sorted separately for environment-friendly
recycling.
This symbol confirms the certification of this product for the USA and
Canada.
3 41 01 091 21 0.book Seite 8 Dienstag, 24. Juli 2007 3:32 15