FUJITSU FTP-621DCL013 - Manual (Page 3)

3
FTP-621MCL351/352
24 V DC
±
5%, average:* 2
0.41 (0.56) A (at 25 mm/s printing speed, 25% printing ratio)
For head 0.63 (1.11) A (at 50 mm/s printing speed, 25% printing ratio)
1.23 (1.65) A (at 100 mm/s printing speed, 25% printing ratio)
(
): Peak
For motor 24 VDC
±
5%, 1.0 A maximum
For logic 5 VDC
±
5%, 0.5 A maximum
Weight Mechanism with cutter: approx. 450 g. Interface board: approx. 100 g
Mechanism + cutter 107 (W)
×
60 (D)
×
71.0 (H) mm (excluding connector)
Interface board 140 (W)
×
89 (D)
×
24.0 (H) mm
Pulse durability : 5
×
10 7 pulse/dot (using Fujitsu Takamisawa's standard
driving method)
Wear resistance : 50 km (at 12.5% printing ratio)
Cutter Cutting life: 3
×
10 5 times
Operating temperature +5 to +40
°
C* 3
Operating humidity 20 to 85% RH (no condensation)
Storage temperature –20 to +60
°
C (excluding paper)
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor (applied energy control, abnormal temperature detection)
Detection Paper out/Mark detect By photointerrupter (command set)
Head-up By microswitch
Paper width 60 mm
1 ply paper in roll: FTP-020P0020
Specifications Item
(Continued)
Power supply
Dimensions
Thermal head
Life
Environmental
conditions
+0
–1
Recommended thermal sensitive
paper*
4
*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame
memory). The communication is parameter transfer.
*2: At 25
°
C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.
*3: Temperature range for guaranteed printing density. It can operate at 0 to +40
°
C.
*4: Please contact us for other thermal papers.