Designation, General specifications – FUJITSU FTP-641MCL201 User Manual
Page 2
2
FTP-641MCL201/202
Printing method
Thermal-sensitive line dot method
Dot structure
864 dots/line
Dot pitch (Horizontal)
0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical)
0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area
108 mm
Number of columns
72 columns/line (maximum)—Alphanumeric KANA
Maximum printing speed
800 dotlines/s (100 mm/s) maximum
JIS ANK
: 128
International characters : 130
Character types
Semi-graphic :
63
ASCII small characters :
31
Download
: 384
24
×
12 dots, (3.0
×
1.5 mm), 72 columns
32
×
16 dots, (4.0
×
2.0 mm), 54 columns
24
×
24 dots, (3.0
×
3.0 mm), 36 columns
32
×
32 dots, (4.0
×
4.0 mm), 27 columns
Interface
1) Centronics standard
2) Bus interface*
1
24 VDC
±
5%, average:*
2
0.82 (1.11) A (at 25 mm/s printing speed, 25% printing ratio)
For head
1.25 (1.66) A (at 50 mm/s printing speed, 25% printing ratio)
2.42 (3.25) A (at 100 mm/s printing speed, 25% printing ratio)
(
): Peak
For motor
24 VDC
±
5%, 1.0 A maximum
For logic
5 VDC
±
5%, 0.5 A maximum
Weight
Mechanism: approximately 290 g. Interface board: approximately 100 g
Mechanism
159 (W)
×
48 (D)
×
28.0 (H) mm (excluding connector)
Interface board
140 (W)
×
89 (D)
×
24.0 (H) mm
■
DESIGNATION
Part number
Front paper insertion type
Rear paper insertion type
FTP-641MCL201
FTP-641MCL202
FTP-621DCL003
FTP-621CU102
FTP-633GA101
Item
Printer mechanism
Interface board
Micro Controller Unit
Gate Array
LSI
■
GENERAL SPECIFICATIONS
Specifications
Item
Power supply
Character composition, dimensions (H
×
W),
Number of columns (standard)
(Continued)
Dimensions