FUJITSU fi-4010CU - Manual (Page 2)

Installation end
7
Confirm that the scanner works correctly, as follows.
1.
Place a document on the ADF paper chute.
For details on how to load documents, see " 3.2 Scanning
document with ADF" in the "fi-4010CU Image Scanner Operator's
Guide"
2.
Start ScandAll 21.
In the start menu
select [Program] then
[Scanner Utility for
Microsoft Windows]
then [ScandAll 21] in
that order.
3.
Specify the scanner
you are using.
Select [Select Source]
from the [Scan] menu
in ScandAll 21.
In the dialog box that is displayed, select "FUJITSU fi-4010CU"
then click [Select].
4.
Click [Scan preview screen] in the toolbar.
5.
In [TWAIN Driver] (Scan
conditions setting screen) set
the scan resolution, paper size
and other scanning conditions,
and click the [Scan] button.
For details on settings in the
[TWAIN Driver] dialog box, refer
to the "Scanner Utility for
Microsoft R Windows R User's
Guide" on the Scanner driver
CD-ROM.
The document is scanned and
the image is displayed on the
ScandAll 21 screen.
If the document can be scanned then setup has been successfully finished.
See "ScandAll 21 Help" for information about ScandAll 21 functions and
operations.
6.
For Windows R XP, the next
screen is displayed, click
[Continue] and complete the
installation.
For other operating systems
click [Next].
For Windows R 98 there is a request to insert a disc.
When this happens, insert the Windows R 98 CD-ROM.
7.
Click [Finish] .
8.
Restart the system.
After restarting the system install the TWAIN data source.
Caution
Installing TWAIN data source
When using Windows R 2000 or Windows R XP log on as an
administrator.
1.
Insert the Scanner Driver CD-ROM, then use the explorer to double
click on D:\Driver2\Setup\install.exe (when your CD-ROM is the D
drive).
2. Follow the instruction on the screen to complete the installation. Make
the best selection that suits your needs.
Select the language you will use during installation.
Check the names of components that need to be installed in [Select
Components]. Explanation of the component is displayed underneath
it.
Check the installation directory. If you need to change the installation
destination, click the [Change Directory] button then specify the
destination
Click the [Continue] button to start the installation.
3.
When installation is finished,
confirm that the following
folder has been created. The
icons displayed differ
depending on the setting in
[Select Component] during
installation.
Continue by installing Image Capturing Software Utilities "ScandAll 21"
for Microsoft
R Windows R .
Scanning documents
Continued from previous page
6
Install Image Capturing Software Utilities "ScandAll 21" for Microsoft R Windows R
When using Windows R 2000 or Windows R XP, log on as an
administrator .
1.
Insert the Scanner driver CD-ROM, then use explorer to double click
on ScandAll 21.exe in the ScandAll folder in the CD-ROM drive.
2.
Select the language you use
during installation in [Chooze
Setup Language] then click [OK].
This screen might not be
displayed.
3.
Click [Next] in the welcome screen.
4.
Carefully read the License
Agreement then click [Yes], if
you agree.
5. Confirm the name of the
destination folder then click
[Next].
6.
Click [Finish].
The screen images may be changed due to improvements without notice.
If the displayed screen images are different from the screen images in this guide follow the actual screen display for installation. Please also refer to the software operation
manual and do the installation according to the actual screens.
Hint When automatic start has been set, the "SETUP DISK START UP
SCREEN" is displayed.Installation can be started from this screen
also.