Furuno 585 - Manual (Page 25)

1. OPERATION
16
Graphic displays
Digital displays
Note: When data is lost 30 sec., the display
shows “- -” at the location where data is lost.
1.19.2 Screen division
1. Press the MENU/ESC key to open the menu.
2. Use
S or T to choose Display and press the
ENTER key.
3. Use S or T to choose Nav Data 1 or Nav
Data 2 and press the ENTER key.
Nav Data setting box
4. Use S or T to choose screen division
desired and press the ENTER key.
5. Press the MENU/ESC key twice to close the
window.
1.20 Menu Items
This section describes menu items not previ-
ously mentioned. For the System menu, see
chapter 2.
Sounder menu
Sounder menu
Zoom Mode: Choose the zoom display to show
among bottom lock, bottom zoom and marker
zoom when “zoom” is chosen with the MODE
knob. For details, see page 3 and 4.
Bottom Area: Set the area where to display the
bottom echo when selecting Auto mode on the
RANGE key.
1. Choose Bottom Area in the Sounder menu
and press the ENTER key.
XTE MARINA
XTE
0.20
nm
27.3
nm
Rng
PORT
SPEED (SOG)
SPEED (STW) WIND True
WPT MARINA COMPASS True
HEADING True
SOG: Speed over
ground
STW: Speed relative
to water
1234
ft
DEPTH
23 45.6789
N
123 45.6789
E
POSITION
12.3
kt
SPEED (SOG)
12.3
kt
SPEED (STW)
123.4
COURSE True**
1234
nm
123.4
RNG/BRG***
°
°
° °
1234
nm
TRIP METER
1234
nm
ODOMETER TEMP
°
123.4
F
HEADING True** WIND SPEED True*
123.4
° 12.3
kt
WIND DIR. True*
123.4 °
X
BAROM PRESS TIME TO GO
1234
hPa
12
H
34
M
XTE
0.50
nm
X
* : APP or TRUE, depending
on menu setting.
** : TRUE or MAG depending
on menu setting.
*** : To destination waypoint.
Sounder
S / T / W / X : Select
[ENTER] : Enter
[MENU] : Back
Pic. Advance : 1/1
Zoom Mode : Bottom Lock
Shift : 0ft
Bottom Area
Interference : Auto
Color Erase : 0%
Clutter : 0%
White Line : 0%
White Marker
TVG : Medium
Smoothing : On
TX Power : Auto
TX Rate : 10
Transducer* : 600W
*: FCV-585
only (see
section
4.10.)