FUJITSU C150-E194-01EN - Manual (Page 16)

2-4 fi-4110CU Image Scanner Operator’s Guide
2.3.2 Confirming the System Conditions
The following environments are required for connecting this scanner to the computer to
read images.
System Conditions
OS Windows 98 preinstall version
Windows 2000 preinstall version
Windows ME preinstall version
Interface The computer has a built-in USB port and the computer maker certifies
that the port operates correctly.
u
Note
-
If your computer is updated to Windows 98 from Windows 95 or NT, the USB
port, even if provided, cannot be used.
2.3.3 Connecting the Power Cable
1) Connect the power cable to the inlet of the scanner.
2) Insert the AC adapter into the outlet.
u
Key point
-
The image scanner is not equipped with a power switch. When connecting a
cable or changing the setting, first be sure to disconnect the power cable from
the outlet.
-
While the driver and the software is active, the reading lamp turns on or off in
accordance with the status of the connected personal computer.
Inlet