Frymaster 8196339 - Manual (Page 23)

3-6
1. Open the cabinet and slide the JIB from
the cabinet (see Figure 5).
Figure 5
2. Remove the cap and pour any remaining oil in the
container into all fry vats equally (see Figure 6).
Figure 6
3. With the jug upright remove the cap and
foil seal (see Figure 7).
Figure 7
4. Put the tube in the new full container (see Figure 8).
Figure 8
5. Slide the JIB onto the shelf inside the fryer cabinet
(as seen in Figure 5).
6. Press the JIB reset switch to turn the JIB LED off
(see Figure 9).
3.5.4 Bulk Oil Systems
If using a bulk oil system, see manufacturer’s instructions for filling JIB and oil disposal.
WARNING: Do not add
HOT or USED oil to a JIB.
Figure 9
WARNING:
Do not add HOT or
USED oil to a JIB.