FUJITSU FTP-642MCL001 - Manual (Page 2)

2
■ DESIGNATION
Part number
Standard
With Auto cutter
FTP-642MCL001/002 *2
FTP-642MCL301/302 *3
FTP-622DCL001/011 *4
FTP-622DSL001/011 *5
FTP-622CU101 *6
FTP-622Y001
FTP-622Y201
FTP-622Y301
FTP-622Y401
Item
Printer mechanism
Interface board
■ GENERAL SPECIFICATIONS
(Continued)
Centronics Standard
Serial (RS-232C)
Thermal head cable
Parallel (centronics) Interface cable
Serial (RS-232C) Interface cable
Power cable
LSI(MCU)
*2: 001 is for front paper insertion (curl path) and 002 is for rear paper insertion (straight path).
*3: Constructed with mechanism+cutter+attachment. 301 is for front paper insertion (curl path) and 302 is for rear paper insertion (straight path).
*4: 001 /011 supports ANK and 101 supports ANK + Kanji (pages 98-103).
*5: 001/011/012 supports ANK and 111 supports ANK + Kanji (pages 98-103).
*6: CU101 supports Kanji and cutter control.
Part number FTP-642MCL001/002 FTP-642MCL301/302
Printing method Thermal-sensitive line dot method
Dot structure 832 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dot/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dot/mm)—Line feed pitch
Effective printing area 104 mm
MCL001/301 112 mm
Paper width
MCL002/302 114 mm
Paper thickness 60~100
µ
m* 1 60~100
µ
m* 1
Cutting type ----------- full or partial
Number of columns 69 columns/line (24
×
12 dot font)
Maximum printing speed 640 dot line/s (80 mm/s)
Alphanumeric KANA: 159 International characters: 195
Character types
JIS KANJI (FTP-622DCL101/111): approx.6800
24
×
12 dots, (3.0
×
1.5 mm), 69 columns
24
×
24 dots, (3.0
×
3.0 mm), 34 columns
16
×
8 dots, (2.0
×
1.0 mm), 104 columns
16
×
16 dots, (2.0
×
2.0 mm), 54 columns
Specifications Item
Character composition, dimensions (H
×
W),
Number of characters
Cables