Driver scope of supply, 2 provided by the supplier of 3, Party equipment – FieldServer FS-8700-39 User Manual
Page 4: 1 hardware, 2 required 3, Party configuration
FS-8700-39 EST3 Driver Manual
Page 4 of 26
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
2
DRIVER SCOPE OF SUPPLY
2.1 Supplied By FieldServer Technologies for this Driver
FieldServer Technologies PART # Description
FS-8915-10
7-ft Cat5 cable with RJ45 connectors at both ends
FS-8917-16
Cable, EIA232:485 Pigtail RJ45 Port
2.2 Provided By the Supplier of 3
rd
Party Equipment
2.2.1 Hardware
PART #
Description
EST3 Gateway
3-RS232 Card Rev 5.0 Needs to be installed for PAL chip Rev 1.1.
3-RS232 Card Rev 6.0 Needs to be installed for PAL chip Rev 1.2.
2.2.2 Required 3
r d
Party Configuration
The EST3 panel has to be set into the “Gateway Mode” using the EST3 Configuration tool (3-SDU)
Possible Protocols
ECP Type II
Supported
ECP Type II with Text
Not Supported
ECP Type III
Supported
ECP Type III with Text Not Supported