FUJITSU FTP-637MCL601 - Manual (Page 2)

2
FTP-637MCL401/601
n ParT NuMberS
n SPeCiFiCaTiONS
Part number FTP-637MCL401/601
Printing method Thermal-line dot method
Dot structure 576 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 72 mm
Number of columns ANK 48 columns/line (maximum 12 x 24 dot font)
Paper width 80 mm
Paper thickness 60 to 85 µm (some paper in this range may not be used because of
paper characteristics)
Printing Speed MCL401 Maximum 100mm/sec. (800 dot line/sec.)
MCL601 Maximum 150mm/sec. (1,200 dot line/sec.)
Alphanumeric, kana: 159 types
International characters: 195 types
JIS Kanji (Kanji CG loaded board): about 6800 types
2 × 24 dots, (1.5 × 3.0 mm), 48 columns: ANK
24 × 24 dots, (3.0 × 3.0 mm), 24 columns: ANK
8 × 16 dots, (1.0 × 2.0 mm), 72 columns: ANK
6 × 16 dots, (2.0 × 2.0 mm), 36 columns: ANK
Specifications Item
Character types
Character, dimensions (W×H), number of
columns
Part Number
Easy Load Model with low profile cutter FTP-637MCL401
FTP-637MCL601
LSI for driving MCL401 FTP-627CU301R
MCL601 FTP-627CU601R
Interface
board for
Mech/Cutter
Cutter
supported MCL401 FTP-637DSL291R Parallel (Centronics) /Serial (RS-232C)
MCL601 FTP-627DSL601R Serial (RS-232C) / USB
MCL401 FTP-637DSL623R USB (V 1.1)
FTP-637DSL625R Serial (RS-232C)
MCL601 FTP-637DSL633R USB (V 1.1)
FTP-637DSL635R Serial (RS-232C)/
Interface
cables
Parallel (Centronics) FTP-628Y202
Serial (RS232C) FTP-628Y302
USB FTP-629Y301
Power
cables
Logic FTP-629Y401
Head, motor FTP-629Y601