FIAT SPIDER 2000 User Manual

Page 48

Lights

Headlights

Alignment

For aiming the headlights,

screw 6 (vertically) and C

(horizontally) are readily acces-

sible after removing retaining

ring G.

Removal

Turn off screw E and remove

retaining ring 6. Slacken 4
screws Dand,byturning counter-
clockwise remove headlight unit

L. Then pull off terminal socket I.

Caution: Replace blown bulbs
exclusively with bulbs of the same

type and wattage. Weaker bulbs

will diminish visibility whereas
stronger bulbs will draw a greater
amount of current and overwork

the alternator, resulting in progressi-

ve battery discharge. For bulb speci-

fications see page 63.

Installation

Center headlight unit L on body

by aligning locating dowel H with its

seat. Turn the unit clockwise and tigh-
ten screws D. Refit retaining ring G

by tightening screw E in hole F.

Front Parking and Turn Signal
Lamps

A Lens mounting screws

B Lens

C Bayonet-coupled bulb, double fila-

ment

D Positioning tabs