Furuno UAIS TRANSPONDER FA-150 - Manual (Page 3)

3
2. Push ▼ to select AIS MODE then
press the ENT key.
SOLAS RX
INLAND
3. Select INLAND then press the ENT
key.
How to enter voyage-related data
1. Press the NAV STATUS key.
[NAV STATUS]
NAV STATUS: 0
AIS MODE: INLAND
***STATUS DETAIL***
UNDER WAY USING
ENGINE
2. Press ► to show the DESTINATION
sub-menu.
[DESTINATION] WX
************* (0/0)
[NEW?]
3. NEW is selected; press the ENT key.
[DESTINATION] WX
ENTER A NEW
DESTINATION
QUIT:[NAV STATUS]
4. Press the ENT key. Enter destination
(20 characters max.) then press the
ENT key.
5. Press ► to show the ARRIVAL TIME
sub-menu.
[ARRIVAL TIME] WX
DATE [UTC]: - -/- - -
TIME[UTC]: - -*- -
6. DATE[UTC] is selected; press the ENT
key.
7. Enter the date of arrival then press the
ENT key.
8. TIME[UTC] is selected; press the ENT
key.
9. Enter the estimated time of arrival then
press the ENT key. Use 24-hour
notation.
10. Press ► to show the DRAUGHT
sub-menu.
[DRAUGHT] WX
SOLAS DRAUGHT: 0.0 m
INLAND DRAUGHT:
0.00m
11 SOLAS DRAUGHT is selected; press
the ENT key.
12. Enter SOLAS draught then press the
ENT key.
13. INLAND DRAUGHT is selected; press
the ENT key.
14. Enter inland draught then press the
ENT key.
15. Press ► to show the CARGO TYPE
sub-menu.
[CARGO TYPE] WX
TYPE NO.: 00
**** TYPE DETAIL****
NOT AVAILABLE
16. TYPE NO. is selected; press the ENT
key.
17. Select type of vessel/cargo then press
the ENT key.
18. Press ► to go to the ERI CODE
sub-menu.
[ERI CODE] WX
ERI CODE: 8000
****CODE DETAIL****
VESSEL,
TYPE UNKNOWN
19. ERI CODE is selected; press the ENT
key.
20. Enter four-digit ERI code then press
the ENT key.
21. Press ► to go to the NO. OF
PERSONS sub-menu.
[NO. OF PERSONS] WX
CREW: _ _ _
PASSENGER: _ _ _ _
SHIPBOARD PERSONNEL
_ _ _
NO. OF PERSONS: 0
22. CREW is selected; press the ENT key.
23. Enter number of crew then press the
ENT key.
24. PASSENGER is selected; press the
ENT key.
25. Enter number of passengers then
press the ENT key.
26. SHIPBOARD PERSONNEL is
selected; press the ENT key.
27. Enter number of shipboard personnel
then press the ENT key.
28. NO. OF PERSONS is selected; press
the ENT key.
29. Enter the total number of persons then
press the ENT key.
30. Press ► to go to the LENGTH&BEAM
sub-menu.
[LENGTH&BEAM] WX
LENGTH OF SHIP
0.0 m
BEAM OF SHIP: 0.0 m
31. Enter the length and beam of your ship,
pressing the ENT key after entering
each item.
32. Press ► to go to the OTHER
sub-menu.
[OTHER] W
DYNAMIC INFORMATION
RATE:
AUTO
HAZARDOUS CARGO:
UNKNOWN
UN/LOADED: UNKNOWN
33. DYNAMIC INFORMATION RATE is
selected; press the ENT key.
AUTO
10SEC
5SEC
2SEC
34. Select option then press the ENT key.
35. HAZARDOUS CARGO is selected;
press the ENT key.
NUMBER OF CONES 0
NUMBER OF CONES 1
NUMBER OF CONES 2
NUMBER OF CONES 3
B-FLAG
UNKNOWN
36. Select appropriate item then press the
ENT key.
37. UN/LOADED is selected; press the
ENT key.
UNKNOWN
LOADED
UNLOADED
38. Select appropriate item then press the
ENT key.
39. Press the DISP key to close the menu.
How to send an ETA message
1. Press the MENU key.
2. Select MSG then press the ENT key.
[MSG]
TEXT
ETA/RTA
NO. OF PERSONS
EMMA WARNING
WATER LEVEL
3. Select ETA/RTA then press the ENT
key.
[ETA/RTA]
CREATE MSG
ETA LOG
RTA LOG
4. CREATE MSG is selected; press the
ENT key.
[CREATE MSG]
SET MSG TYPE E
SET DESTINATION
SET ETA
SEND MSG
5. SET MSG TYPE is selected; press the
ENT key.
[SET MSG TYPE]
MMSI
: 000000000
CHANNEL: ALTERNATE
RETRY TIMES: 3
MMS
6. MMSI is selected; press the ENT key.