Fisher-Price H4790 - Manual (Page 8)

8 8 8
Assembly
Back and Bottom View
Seat Bottom Tube Ends
14
Seat Height Adjusters
• From the back and bottom of the assembly, insert a #8 x 1.9 cm
screw through both seat height adjusters and the ends of the
seat bottom tube. Tighten the screws.
#8 x 1.9 cm Screw - 2
15
Back and Bottom View
Hole
Pad
Hole
Elastic Loops
Elastic Loops
Front View
• Lift the assembly upright.
• From the front of the assembly, place the pad onto the seat.
• Lift the bottom of the pad. Insert the two elastic loops on the
pad through the holes in the seat bottom.
• From the back and bottom of the seat, hook the elastic loops to
the tabs on the seat.
Tabs