To install the sing le kba footstand – Meridian Audio M3900 User Manual
Page 97

Installation
Page 97 of 174
M3900 Series Meridian Digital Telephones Description, Installation and Administration
Figure 15
KBAFootstand Assembly
7
To add a second Key-based Expansion Module:
a)
Place the telephone and the two modules face down on a
non-abrasive surface.
b) Plugthe cable from the second module into the 10-pin
connection port on the first module.
c)
Thread the cable through the routing clips on both modules.
d)
Install the Expansion KBA Footstand.
To install the Single KBAFootstand
1
Insert the clips on both the telephone and the Key-based Expansion
Module into the hinges on the footstand assembly, and press on the
front of the footstand until they snap into place.
2
While squeezing both the telephone and the Key-based Expansion
Module tilt handles, swing the footstand into the desired position.
3
Turn the completed assembly upright.
Expansion KBA
Footstand Assembly
Single KBA
Footstand Assembly
Expansion KBA Plate
Install and tighten
these screws
Tighten
these screws