FUJITSU 620C - Manual (Page 12)

2-8
2.6 ADF SCANNING
Standard paper size can be scanned automatically using the ADF. Refer to Figure 2-7.
i). To prevent occasional paper jam when automatically feeding multiple documents, fan the
paper before loading.
ii). Lift the balance wire and place the documents to be scanned onto the ADF paper chute
face down, with the leading edge in the auto feeder entrance. Let the balance wire rest on
the top of the documents.
iii). Adjust the left and right guides so that they are snug against the sides of the documents.
Figure 2-7 - Use ADF to Load Multiple Documents
Left Guide
Auto Feeder Hole
Balance Wire
Document (blank
side)
ADF Paper Chute
Right Guide