Playback, Other operations, Vcr functions – FUNAI CDV210HH8 User Manual
Page 11: Hint, Hint for index search & time search, Index search, Time search, Counter reset, Auto rewind
EN
– 11 –
VCR Functions
1
Press [SEARCH MODE] once.
2
To select Index Mark
3
4
After searching, it automatically
starts playback.
1
Press [SEARCH MODE] twice.
2
Select the desired length of time for fast forwarding or
rewinding.
3
4
After searching, it automatically starts playback.
STANDBY-ON
DISPLAY
VCR
DVD
PAUSE
SLOW
VCR/TV
SKIP/CH.
PLAY
STOP
OPEN/CLOSE
/EJECT
SPEED
AUDIO
1
2
3
4
5
6
7
8
9
0
+10
1
Insert a video cassette
into this unit.
2
To start playback
3
To stop playback
4
To eject the cassette
Hint
• When a tape without
record tab is inserted,
the unit will start
playback automatically.
• Tracking will be
automatically adjusted
upon playback.
To adjust the tracking
manually, press [SKIP/
CH. G/K, H/L] (or
[CHANNEL K/L]) dur-
ing playback.
Playback
VIDEO
AUDIO
STANDBY-ON
REW
F.FWD STOP/EJECT
PLAY
RECORD
REC
TIMER
IR
Before:
Turn on the TV and set it to channel 3.
• If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section on page 6.
PLAY
STOP
OPEN/CLOSE
/EJECT
Other Operations
Hint
• Still/Slow mode will be automatically canceled after 5 minutes to prevent damage to the tape and the video head.
• To return to playback from the Picture Search/Still/Slow mode, press [PLAY B].
VCR Functions
2
You can skip the program backward and forward by the Index
Mark.
Index Search
SEARCH
MODE
Pro.1
Pro.2
Pro.3
Pro.4
Pro.5
02
01
01
02
03
Beginning
of the tape
End of
the tape
CURRENT PROGRAM
INDEX MARK
PLAYB
Hint
• The Index Mark will be made automatically at the beginning of each recording.
• The time gap between Index Marks should be greater than 1 minute for
SP mode, 2 minutes for LP mode and 3 minutes for SLP mode.
To rewind
To fast forward
Hint for Index Search & Time Search
• These functions are not available during recording.
• Press [STOP C] to stop the search.
• If a tape ends during a search, your search will be canceled and the tape
will rewind to the beginning.
Time Search
You can search backward and forward a specific length of time
on a tape.
INDEX SEARCH
0 3
INDEX SEARCH
– –
ss
BB
or
SEARCH
MODE
TIME SEARCH
– : – –
PLAYB
or
(1 minute~9 hours and 59 minutes)
To rewind
To fast forward
ss
BB
Counter Reset
Press [CLEAR/C.RESET].
To play back in slow motion (Slow mode)
Press [SLOW] during playback or the still mode.
• If the noise bars appear on the TV screen, you can reduce it by
using
[
SKIP/CH. G/K, H/L] (or [CHANNEL K/L]).
Auto Rewind
When a tape reaches its end during playback, fast-forward or record-
ing (except Timer Recording and One Touch Recording), the tape
will automatically rewind to the beginning. After rewinding finishes,
the unit will eject the tape.
VCR
VCR
VCR
VCR
• Insert a tape into this unit.
VCR
VCR
• Insert a tape into this unit.
01 ~ 20
TIME SEARCH
2 : 5 0
0:01~ 9:59
3
1
4
3
4
2
To cue or review picture during playback (Picture Search)
Use [g] or [h ]([ F.FWD g] or [REW h]).
• Press it again and the unit will search in super high speed. (in the
SLP mode only)
To freeze the picture on TV screen during playback (Still mode)
Press [PAUSE F]. Each time you press the button, the picture will
be forwarded by one frame.
• If the picture begins to vibrate vertically in the still mode,
stabilize the picture by using [SKIP/CH. G/K, H/L]
(or [CHANNEL K/L]).
• If the picture is distorted or rolling vertically, adjust the vertical
hold control on your TV if equipped.
E8C1UCD_EN.indd 11
E8C1UCD_EN.indd 11
2007/04/03 9:49:04
2007/04/03 9:49:04