FUNAI CDV210HH8 - Manual (Page 10)

– 10 – EN
Setup
STANDBY-ON
DISPLAY VCR DVD PAUSE
SLOW
VCR/TV
SKIP/CH.
PLAY
STOP
RECORD
MENU
SETUP TOP MENU
MODE ZOOM
SUBTITLE T-SET ANGLE
ENTER
RETURN
SEARCH MODE
REPEAT A-B
OPEN/CLOSE
/EJECT SPEED AUDIO
CLEAR/ C. RESET
1 2 3
4 5 6
7 8 9
0 +10
Installing the Batteries for the
Remote Control
Install two AA batteries (supplied)
matching the polarity indicated inside
battery compartment of the remote
control.
Keep in mind the following when using the
remote control:
• Make sure that there is no obstacle between
the remote control and the remote sensor
on the unit.
• The maximum operable ranges from the
unit are as follows.
- Line of sight: approx. 23 feet (7m)
- Either side of center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
Remote Control
2 3 1
Hint
• Do not mix alkaline and manganese bat-
teries.
• Do not mix old and new batteries.
• Always remove batteries from remote
control if they are dead or if the remote
control is not to be used for an extended
period of time. This will prevent battery
acid from leaking into the battery com-
partment.
DVD mode VCR mode
1 2 3
4 5 6
7 8 9
0 +10
• To select chapter or title
directly.
• To select track directly. (CD)
• To select group/track
directly. (MP3)
• To select channel.
• The +10 button has no effect
in VCR mode.
• To search forward/backward
through a disc.
• To begin slow forward
playback in the pause mode.
• To search forward/backward
through a disc.
• To forward/backward a tape.
A-B • To repeat between your cho-
sen point of A and B.
• To repeat between your
chosen point of A and B.
ANGLE • To select camera angles on a
disc.
AUDIO • To select audio languages on
a disc.
• To select STEREO, L-ch or R-ch.
(CD)
CLEAR/
C. RESET
• To remove status number in
program input.
• To clear the numbers entered
incorrectly.
• To cancel the point for A-B
repeat.
• To remove status number in
program input.
• To clear the numbers entered
incorrectly.
• To cancel the point for A-B
repeat.
• To exit the VCR Menu.
• To reset the tape counter.
DISPLAY • To display the current disc
mode.
• To display the current disc
mode.
• To display the current time,
tape counter, and channel.
DVD • To select the DVD output mode.
• To activate the remote
control in DVD mode.
• To select the DVD output mode.
• To activate the remote
control in DVD mode.
ENTER
• To move the cursor and deter-
mine its position.
• To move the cursor and deter-
mine its position.
• To select an item
on the VCR Menu.
• To advance to the
next VCR Menu.
• To go back one
step during clock
and timer setting.
MENU
• To call up the Menu on a disc. • To call up the VCR Menu.
MODE
• To arrange the playing order
or play randomly.
• To set black level on/off.
• To set virtual surround
on/off.
• To arrange the playing order
or play randomly.
• To set virtual surround on/off.
OPEN/CLOSE
/EJECT
• To open or close the disc tray. • To open or close the disc tray.
• To eject the video
cassette from the VCR.
PAUSE • To pause disc playback.
• To advance playback one
frame at a time.
• To pause disc playback.
• To pause tape playback or
recording.
• To advance playback one
frame at a time.
PLAY
• To begin disc playback. • To begin disc playback. • To begin tape playback.
RECORD • To start a recording or One
Touch Recording.
REPEAT • To play a chapter or title
repeatedly.
• To play a track or disc repeat-
edly. (CD)
• To play a track, group or disc
repeatedly. (MP3)
RETURN • To return to the previous
operation in menu.
• To return to the previous
operation in menu.
SEARCH
MODE • To search chapter, title or
time.
• To search track.
• To search time. (CD)
• To search groups. (MP3)
• To call up the index or time
search menu.
SETUP • To call up the DVD setup
menu.
• To call up the DVD setup
menu.
SKIP/CH. SKIP/CH.
• To skip chapters or titles.
• To skip tracks. (CD)
• To skip groups or tracks.
(MP3)
• To change channels.
• To adjust the tracking manu-
ally during playback.
SLOW • To view the tape in slow
motion.
SPEED
• To select the recording speed.
STANDBY-ON
• To turn the unit on/off. • To turn the unit on/off. • To turn the unit on/off.
STOP • To stop playback. • To stop playback.
• To stop playback or
recording.
SUBTITLE
T-SET
• To select subtitles on a disc.
• To put the VCR into standby
mode for a Timer Recording.
TOP MENU • To call up the Top Menu on a
disc.
VCR • To select the VCR output mode.
• To activate the remote
control in VCR mode.
VCR/TV • To select DVD position or TV
position.
• To select CD/MP3 position or
TV position.
• To select VCR position or TV
position.
ZOOM • To magnify part of a picture.
(x2 / x3 / x4 / x1/2)
Button
(Alphabetical order)
Disc/Tape
E8C1UCD_EN.indd 10 E8C1UCD_EN.indd 10 2007/04/03 9:49:00 2007/04/03 9:49:00