Fantom Vacuum FM1705K - Manual (Page 9)

Care and Maintenance
To improve the performance and life of your unit, we recommend you do
the following:
1. Once a month clean the unit with a dry cloth, including the chamber into
which the dust tray fits. Remove any hair, fiber or other materials that
may have built up in the chamber and on the rotating brush.
2. Don't use abrasive materials to clean the hand sweeper. Do not immerse
the unit in water.
3. Do not pick up liquids or use on wet floors.
4. Do not use on concrete, tar or similar rough surfaces .
5. Don't pick up pieces of string or fabrics with the sweeper.
6. Do not clean tasseled or frayed carpets with the sweeper.
7. To remove the squeegee, turn the screw plug a quarter turn counter
clockwise and slide the squeegee out. Slide the new squeegee in and then
turn the screw plug a quarter turn clockwise to lock the squeegee in place.
For replacement squeegees, call 1 (800) 275-9251.
BALAYEUSE À MAIN SANS CORDON
Modèle FM1705K
3.6 volts CD
1. Commutateur marche/arrêt
2. Voyant de recharge
3. Plateau à poussière
4. Couvre-brosse transparent 5. Brosse rotative
6. Prise de recharge
7. Manche pivotant
8. Adaptateur de recharge
9. Bloc chargeur avec
support mural (facultatif)
Facultatif
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE REASON POSSIBLE SOLUTION
SWEEPER WILL NOT
OPERATE
1. Batteries discharged.
2. No power in electrical
outlet supplying
transformer.
3. Unit needs servicing.
1. Charge unit.
2. Check fuse or breaker.
Replace fuse/reset breaker.
3. Call Customer Service.
SWEEPER WILL NOT
PICK-UP
1. Dust tray is full.
2. Unit needs recharging.
3. Brush
bar dirty.
1. Empty dust tray.
2. Charge
unit.
3. Clean brush bar.
DUST ESCAPING
FROM SWEEPER 1. Dust tray is full.
2. Brush
bar dirty.
1. Empty dust tray.
2. Clean
brush bar.
ROTATING BRUSH
WILL NOT PICK UP 1. Unit clogged.
2. Dust tray is full.
1. Check for excessive material
on brush or in bottom of
sweeper. Remove obstruction
from brushes and/or sweeper.
2. Empty and clean dust tray.
SWEEPER WILL NOT
CHARGE
1. Electrical outlet not
working
2. Charging Adapter not
working
3. Batteries no longer
functioning
4. On/Off switch is in the ON
position.
1. Check to ensure outlet is
working properly. (Easily
checked by plugging in
another appliance.
2. Replace
charging adapter
3. See battery disposal pg. 6.
4. Depress
On/Off switch.
7 18
REMARQUE:
Lors de l’envoi, les piles de la balayeuse à main sans
cordon modèle ne sont pas chargées. Vous devrez
charger les piles pendant 24 heures avant l’usage
initial. Utilisez des piles de rechange XSB705
seulement.