Using the contact temperature probe, Operating the thermometer – Fluke 561s User Manual

Page 13

Text mode
Original mode

Operating the Thermometer

Switch

efh012f.eps

Figure 7. Switching Between

C and

Using the Contact Temperature Probe

Warning

To avoid electrical shock or personal injury, do not connect the optional external
probe to live electrical circuits.

Connect the probe to the input on the top of the Thermometer. The probe temperature and KTC
appears in the secondary display. The live infrared temperature continues to show in the
primary display. Connect the temperature probe as shown in Figure 8.

Note

With the probe inserted, the Thermometer stays on for 10 minutes (with laser off)

after the trigger is released.

efh009f.eps

Figure 8. Connecting the Temperature Probe