Meridian Audio 861 - Manual (Page 28)

24
Customising the 861
Reference Digital
Surround Controller
Changing the DSP preset for a source
Each source has an appropriate DSP preset associated
with it for each music format. For example, for a
standard stereo (PCM) signal the CD source uses
Trifield and the TV source uses TV Logic.
This section explains how to change the DSP preset
associated with any source.
To assign a DSP preset to a source
Make sure the menus are unlocked; see To unlock
the menus, page 16.
Select the source you want to change by pressing
the Source key on the front panel or the appropriate
source button on the remote, eg CD.
If necessary, select a signal in the appropriate format.
For example, to change the DSP preset used for
DTS compact discs, play a DTS CD.
The display will show the source and the DSP preset
currently assigned to that source.
For example: CD Trifield 65
Press A or V until the display shows the new DSP
preset you want to assign.
For example: CD MusicLogic 65
Press Assign (under the front panel) to save the
new assignment.
•
•
•
•
•