Frymaster BIH52 - Manual (Page 105)

4-34
4.5 Oil Handling System Components
4.5.1 Drain System Components
4.5.1.1 Square Drain Sections and Seal Components
9 10
12 11
13
15
14
4
5
6 7 8
Dual Vat Components
Full Vat Components
16 17
1
2
3
ITEM PART # COMPONENT
1 KIT-0257SP Clamp Assembly and Seal Kit
2 816-0420 Seal (Rubber Boot)
3 806-6374SP Clamp Assembly
4 823-2199 Dual Vat Left End Outer Section (4.12-inches/10.5 cm)
5 823-2212 Dual Vat Left End Inner Section (3.57-inches/9.1 cm)
6 823-2204 Dual Vat Outlet Section with 1 Bracket (11.55-inches/29.3 cm)
7 823-2192 Dual Vat Outlet Section with 2 Brackets (11.55-inches/29.3 cm)
8 823-2202 Dual Vat Drain Section with 2 Brackets (11.55-inches/29.3 cm)
9 823-2211 Dual Vat Closed Outlet Section with 1 Bracket (15.86-inches/40.3 cm)
10 823-2210 Dual Vat Closed Outlet Section with 2 Brackets (15.86-inches/40.3 cm)
11 823-2212 Dual Vat Right End Inner Section (3.57-inches/9.1 cm)
12 823-2194 Dual Vat Right End Outer Section (4.12-inches/10.5 cm)
13 823-2200 Full Vat Outlet Section with 2 Brackets (23.38-inches/59.4 cm)
14 823-2207 Full Vat Outlet Section with 3 Brackets (23.38-inches/59.4 cm)
15 823-2233 Full Vat Drain Section with 1 Bracket (15.39-inches/39.1 cm)
16 823-2197 Full Vat Left End Section (7.95-inches/20.2 cm)
17 823-2198 Full Vat Right End Section (7.95-inches/20.2 cm)
* 811-0932 Vent Tube, Teflon 3/8” OD Bulk
* 813-0408 ¼ Pipe Plug, Used when vent tube is not used.
* 816-0123 Cap-Square Drain (KIT0256 End Cap Kit)
* 810-1372 Elbow, 90º Vent Tube (used with Items 4 and 16)
* Not illustrated.
NOTE:
Item 5 is always used left of outlet section; Item 11 is always used right of outlet section.