Fujitsu Siemens Computers V2020 - Manual (Page 37)

Using your notebook
A26391-V2020-Z120-1-7619, edition 1 29
Handling CD/DVDs
!
Observe the following guidelines when handling CD/DVDs:
●
Avoid touching the surface of a CD/DVD. Hold CDs/DVDs by their edges!
● Always store CDs/DVDs in their cases. This will protect CD/DVD from dust,
scratches and other damage.
● Protect your CDs/DVDs from dust, mechanical vibration and direct sunlight!
● Avoid storing a CD/DVD in areas subject to high temperatures or humidity.
i
In order to make use of the full recording speed of your drive, please use disks marked
"Multispeed" or "High Speed"
Use only DVD blanks of the type DVD+RW. Other types of DVD blanks are not supported
by your optical drive.
Inserting or removing a CD/DVD
Your notebook must be switched on.
► Push the insert/eject button (see chapter "Notebook views", Number 27).
The drive tray will open.
►
Gently pull the drive tray completely out.
► Place the CD/DVD in the drive tray with the label facing upwards.
or
►
Take out an inserted CD/DVD.
► Push in the drive tray until you feel it lock into place.
Manual removal (emergency removal)
In the event of a power failure or damage to the drive it may be necessary to manually remove the
CD/DVD.
► Switch
the notebook off.
► Press a pen or a piece of wire (e.g. a paperclip) firmly into the opening
(see the "Notebook views" chapter, Number 28).
The drive tray is ejected. You can now pull the drive tray out of the drive.