Furuno CH-37 - Manual (Page 47)

3-3
3.3 Selecting Bearing for the Vertical Fan
The TRAIN control determines the bearing of the vertical fan
beam. To which bearing the beam positions is known by the
train indicator mark.
Train Indicator Mark Training of Vertical Fan Beam
Bow Bow
TRAIN
The training of the fan beam depends on the status of the AUTO
TRAIN key in the sub panel 2.
Train Indicator Mark Training of Vertical Fan Beam
Bow
AUTO TRAIN
[on]
(LED lights.)
AUTO TRAIN
[off]
(Manual train)
(LED goes
off.)
[Example]
Auto Train Sector: 90
°
[The beam
trains auto-
matically with-
in the selected
range cen-
tered at the
bearing set by
the TRAIN
control.]
Bow
Bow
Manual train range can
be selected either HALF
(174
°
) or FULL (360
°
)
on the SYSTEM menu.
[The TRAIN control
can rotate the fan
beam to any bearing
desired. See V-MODE
MANUAL TRAIN on
page 6-2.]