Fisher & Paykel DD24ST - Manual (Page 2)

2 3 PRODUCT DIMENSIONS CABINETRY DIMENSIONS
A
B C
E
D
F
G
H
J
Prefinished Flat door &
Integrated models for
18 7⁄8”(480mm) cavity
Prefinished LCD models &
Integrated models for
17 15⁄16”(456mm) cavity
K
Product dimensions (inches (mm))
Pr
e
fi nished
LCD ** DD24ST
Pr
e
fi nished Flat door
DD24ST
In
te
grate
d
17 15⁄16” (456 mm) c
avit
y**
DD24ST
In
te
grate
d
18 7⁄8” (480 mm) c
avit
y
DD24ST
A overall height* of product (incl. drawer front height) 17 13⁄16” (453) 18 ¾ ” (477) 17 13⁄16” (453) 18 ¾ ” (477)
B overall width of product 23 9⁄16” (599) 23 9⁄16” (599) 23 9⁄16” (599) 23 9⁄16” (599)
C overall depth of product (excl. curvature/handle) 22 7⁄16” (570) 22 7⁄16” (570)
22 7⁄16”
(570) ***
22 7⁄16”
(570) ***
D depth of drawer (open) (excl. curvature/handle) 21 3⁄16” (538) 21 3⁄16” (538) 21 3⁄16” (538) 21 3⁄16” (538)
E height* of chassis 17 13⁄16” (453) 17 13⁄16” (453) 17 13⁄16” (453) 17 13⁄16” (453)
F depth of chassis (incl. trimseal) 21 ¾ ” (552) 21 ¾ ” (552) 21 ¾ ” (552) 21 ¾ ” (552)
G depth of drawer front panel (excl. curvature/handle) 11⁄16” (18) 11⁄16” (18) 11⁄16” (18) 11⁄16” (18)
H depth of curvature or handle 7⁄16” (11) 1 5⁄8” (41) n/a n/a
I height of drawer front 17 ¼ ” (438) 18 ½ ” (470)
17 3⁄8” (442)
min
18 ½ ” (470)
min
J height of venting area at base of product ¼ ” (7) 3⁄8” (9) 3⁄8” (9) 3⁄8” (9)
K height of installation bracket slots (on top of chassis) 1⁄16” (2) 1⁄16” (2) 1⁄16” (2) 1⁄16” (2)
*Chassis heights include bracket slots **In these instances, you would skip step 7 ***Panel thickness - 11⁄16” (18 mm)
Note: for Prefi nished Flat door models, the height from the top of handle to the top of door - 2 ½ ” ( 64 mm)
I
Installation diagrams for illustration purposes only
A
A
B
C
Cabinetry dimensions (inches (mm))
Pr
e
fi nished
LCD
DD24ST
Pr
e
fi nished
Flat door
DD24ST
In
te
grate
d
17 15⁄16” (456 mm)
cavit
y
DD24ST
In
te
grate
d
18 7⁄8” (480 mm)
cavit
y
DD24ST
A inside height of cavity 17 15⁄16” (456) 18 7⁄8” (480) 17 15⁄16” (456) 18 7⁄8” (480)
B inside width of cavity 23 5⁄8” (600) 23 5⁄8” (600) 23 5⁄8” (600) 23 5⁄8” (600)
C inside depth of cavity (inside) 22 7⁄8” (580) 22 7⁄8” (580) 22 7⁄8” (580) 22 7⁄8” (580)
K F
C
H
Installation diagrams for illustration purposes only
1⁄8 ” ( 2.5 mm)
1⁄8 ” ( 2.5 mm)
½ ” ( 13 mm)
Minimum clearances (inches (mm))
Cavity height options for Integrated models:
To match existing kitchen cabinetry or the height of other
appliances installed next to DishDrawer, you may choose to
install DD24ST Integrated models into either a
17 15⁄16” (456 mm) or a 18 7⁄8” (480 mm) high cavity.
Note: the minimum height of the custom drawer front
panel will also be different for these two options.
(1,2) -1- 599754C DD24S TALL installA2 USCA.indd 15/4/09 2:34:15 PM (1,2) -1- 599754C DD24S TALL installA2 USCA.indd 15/4/09 2:34:15 PM