Function overview, Setup, Rear panel front panel – FUNAI DV220TT8 User Manual
Page 9: L1 l2, You must first select either dvd or vcr operation
SETUP
EN
– 9 –
Function Overview
You must first select either DVD or VCR operation.
VCR MODE
Press [VCR
] on the remote control.
(The VCR OUTPUT light will illuminate.)
DVD MODE
Press [DVD ] on the remote control.
(The DVD OUTPUT light will illuminate.)
Selecting DVD or VCR Operation
Front Panel Indicator Lights
Front & Rear Terminals
1: DVD AUDIO OUT* (analog) jacks
Connect an audio cable from here to the audio input jack of your televi-
sion or audio device.
2: DVD/VCR AUDIO OUT jacks
Connect an audio cable from here to the audio input jack of your television
or audio device. Standard connection for DVD/VCR use.
3: VCR AUDIO IN jack
Connect a monaural audio cable from the audio output jack of your
camcorder, VCR, etc. to here. After making the connection, press
[INPUT SELECT] on the remote control. Select “L1” to activate the rear
AUDIO IN jack, or “L2” to activate the front.
4: VCR VIDEO IN jack
Connect a video cable from the video output jack of your camcorder, VCR,
etc. to here. After making the connection, press [INPUT SELECT] on the
remote control. Select “L1” to activate the rear VIDEO IN jack, or “L2” to
activate the front.
5: DVD/VCR VIDEO OUT jack
Connect a video cable from here to the VIDEO input jack of your televi-
sion or audio device. Standard connection for DVD/VCR use.
6: COMPONENT VIDEO OUT* jacks
Connect component video cables from here to the component video
input jacks of your television.
7: S-VIDEO OUT* jack
Connect an S-video cable from here to the S-video input jack of your
television.
8: DIGITAL AUDIO OUT COAXIAL* jack
Connect a digital audio coaxial cable from here to the digital audio input
jack of your digital audio receiver.
* For enhanced DVD viewing. DVD/VCR video and audio connection required
to view cassette tapes.
Note:
• Audio and video cables are included for both VCR and DVD viewing.
You can enhance your DVD picture and sound quality with an S-video
cable, component video cables, or a digital audio coaxial cable. Please
purchase the necessary cables at your local store. (Refer to pages
6-7.)
POWER
VIDEO
AUDIO
REW
F.FWD
PLAY REC/OTR
TRACKING
OUTPUT
REV/SKIP STOP
PLAY
SKIP/FWD
VCR
OPEN/CLOSE
DVD
P-SCAN
PLAY
REC
TIMER REC
STOP/EJECT
Lights up when the inserted disc
is being played back.
Blinks when an unplayable disc
is inserted.
Lights up when the timer recording or
one-touch timer recording (OTR) has been set.
Lights up during a recording or one-touch timer
recording (OTR). Blinks when a recording is paused.
Lights up when the unit is turned on.
Lights up when this unit
is in the DVD mode.
Lights up when this unit is in the VCR mode.
Lights up when the progressive scan system is activated.
POWER
OPEN/CLOSE
DISPLAY
VCR
DVD
MODE
TRACKING
PLAY
STOP
REC/OTR
SKIP
PAUSE
MENU
TOP MENU
AUDIO
SETUP
SEARCH
MODE
ZOOM
ANGLE
SUBTITLE
ENTER
REPEAT
A-B
SPEED
T-SET
1
2
3
4
5
6
7
8
9
0
+10
RETURN
CLEAR/
C. RESET
INPUT
SELECT
TRACKING
OUTPUT
REV/SKIP STOP
PLAY
SKIP/FWD
VCR
OPEN/CLOSE
DVD
P-SCAN
PLAY
OUTPUT
VCR
DVD
DVD button
VCR button
OUTPUT button
DVD OUTPUT light
VCR OUTPUT light
DIGITAL
AUDIO OUT
COAXIAL
AUDIO
OUT
DVD
VCR
DVD/VCR
S-VIDEO
OUT
COMPONENT
VIDEO OUT
AUDIO IN
VIDEO IN
AUDIO OUT
VIDEO OUT
L
L
Y
R
R
C
B
/
P
B
C
R
/
P
R
VIDEO
AUDIO
REW
F.FWD
PLAY REC/OTR
REC
TIMER REC
STOP/EJECT
rear panel
front panel
3
2
7 6 5
3
4
4
1
8
L1
L2