FUJITSU MHT2060AT User Manual
Page 114
Interface
5-40
C141-E192-01EN
Bit 10:
'1' = Supports the Host Protected Area function.
Bit 9:
'1' = Supports the DEVICE RESET command.
Bit 8:
'1' = Enables the SERVICE interrupt. From the SET FEATURES
command
Bit 7:
'1' = Enables the release interrupt. From the SET FEATURES
command
Bit 6:
'1' = Enables the read cache function. From the SET FEATURES
command
Bit 5:
'1' = Enables the write cache function.
Bit 4:
'1' = Enables the P PACKET command set.
Bit 3:
'1' = Supports the Power Management function.
Bit 2:
'1' = Supports the Removable Media function.
Bit 1:
'1' = From the SECURITY SET PASSWORD command
Bit 0:
'1' = From the SMART ENABLE OPERATION command
*16 WORD 86
Bits 15:
Reserved
Bit 13-10: Same definition as WORD 83.
Bit 9:
'1' = Enables the Automatic Acoustic Management function.
From the SET FEATURES command
Bit 8:
'1' = From the SET MAX SET PASSWORD command
Bits 7-6:
Same definition as WORD 83.
Bit 5:
'1' = Enables the Power-Up In Standby function.
Bit 4:
'1' = Enables the Removable Media Status Notification function.
Bit 3:
'1' = Enables the Advanced Power Management function.
Bits 2-0:
Same definition as WORD 83.
*17 WORD 87
Bits 15:
= '0'
Bits 14:
= '1'
Bits 13-2: Reserved
Bit 1-0:
Same definition as WORD 84.