FUJITSU FTP-639MCL354-R - Manual (Page 3)

3
FTP-639MCL054/353/354-R
For head 24 VDC ±5% .9A (4A, )(24V , 25% printing ratio)
For printer motor 24VDC ±5% A maximum
For cutter motor --- 24VDC±5% .2A maximum
For logic 5VDC±5% 0.2 A maximum
Printer Mechanism 04.4 Ч 40.5 Ч 20.5mm ---
Dimensions
W x D x H Printer Mechanism
with cutter
--- 0.4 Ч 62.5 Ч 37.7mm
Interface board (DCL/DSL) 70 Ч 60 Ч 2.6 mm
Interface board (DSL00) 95 x 73.5 x .6mm
Interface board (DCL300) 77 x 50 x 2.5mm
Weight Printer Mechanism Approximately 25g ---
Printer Mechanism
with cutter
--- Approximately 320g
Interface board (standard) Approximately 25g
Interface board (med speed) Approximately 45g
Interface board (hi speed) Approximately 22g
Life Head Pulse durability: 00 million pulse/dot
(using Fujitsu Components' standard driving method)
Wear resistance: 00 km (at 2.5% print ratio)
Cutter --- 500,000 cuts
Operating temperature -10°C to +60°C (Guarantee) 0˚C to +50°C (Guarantee)
Environmental
conditions Operating humidity 20 to 85% RH (no condensation)
Storage temperature –40°C to +70°C (excluding paper) –20°C to +60°C
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor
Detection Paper out/Mark detect By photointerrupter
Head release By slide switch
Cutter position By microswitch (inside cutter)
High sensitivity paper TF50KS-E4 (Nippon paper)
Standard paper TF60KS-E (Nippon paper), FTP-030P004 (80mm),
PD50R (Oji paper), FTP-030P070 (80mm)
Medium term paper TP60KS-F (Nippon paper), FTP-030P002(80mm),
PD70R (Oji paper)
P220VBB- (Mitsubishi paper)
PD60R-N (Oji paper)
Long term paper AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)
Label paper HW54T (Nippon paper)
Part number FTP-639MCL054/074-R FTP-639MCL354/374-R
Specifications Item
Power
supply
Recommended
thermal sensitive
paper