Frymaster GSMS - Manual (Page 37)

2-17
ITEM PART # COMPONENT
1 826-1374 Screw, #10 x ½-inch Hex Head (Pkg. of 25)
2 810-0691 Tube, Vent
3 Valve, Honeywell Gas (Non-CE)
826-1122 Natural or Manufactured Gas (See NOTE 2.)
826-1123 Propane Gas
4 811-0800 Tube, 12.5-inch Enrichment (See NOTE 1.)
5 813-0004 Elbow, ⅛-inch NPT 90° BM
6 813-0016 Nipple, ⅛-inch NPT x Close BM
7 813-0022 Nipple, ½-inch NPT x Close BM
8 Nipple, ¾-inch NPT BM
813-0137 28.5-inch (used on GSMS units)
813-0257 24.5-inch (used on GBC/GC units)
9 813-0154 Plug, ⅛-inch Hex Head Pipe
10 813-0301 Tee, ¼-inch NPT Male x ⅜-inch Tube Brass (See NOTE 2.)
11 813-0304 Bushing, ½-inch to ¼-inch Flush BM (See NOTE 2.)
12 813-0354 Elbow, 90° ⅛-inch NPT x ⅛-inch Tube Brass
13 813-0378 Fitting, ⅛-inch NPT Female Cross
14 813-0405 Nipple, ⅛-inch NPT x 2.00-inch BM
15 823-2004 Mount, Front Gas Line
16 900-4642 Hanger, Rear Gas Line
17 900-4643 Tube, ⅜-inch Aluminum Gas (See NOTE 1 and NOTE 2.)
18 806-9678SP Plug, CE Honeywell Gas Valve
19 810-1006 Bushing, ¼-inch NPT to ⅛-inch NPT Brass
20 813-0567 Fitting, ¼-inch NPT Female Cross
21 810-1025 Connector, ¼-inch NPT male x ⅜-inch Tube Brass
22 813-0077 Nipple, ¼-inch NPT x Close Galvanized
23* 810-1041 Kit, CE Valve Accessory
24 810-1715 Valve, Honeywell CE Gas (Natural or Propane)
* Contains straight and elbow flanges, o-rings, and screws for mounting flanges to valve.
NOTE 1: Item 4 is delivered straight and must be formed by the installer to fit the unit. Item 17
is delivered formed, but may require further forming by the installer to fit the unit.
NOTE 2: In Manufactured Gas (MFG) units, item 10 is replaced by P/N 810-0926, item 11 is
not used, and item 17 is replaced by P/N 900-1945.