Assembly – Fisher-Price Power Wheels by Fisher Price Chevrolet Silverado B1476 User Manual

Page 14

Assembly

Cab

Hole

Antenna

• Fit the tapered end of the antenna into the hole in the

front of the cab.

• Press firmly to snap the antenna into the hole.

End T-Loop

Seat

Short Seat
Belt Strap

Fastener

• Position the seat upside down.

• Insert the fastener end of a short seat belt strap through

one of the the slots near the outer edge of the seat.
Make sure the side of the seat belt with the fastener
faces the outer edge of the seat.

• Pull the short seat belt strap completely through the slot

until the end T-loop at the opposite end of the belt
catches against the slot. (You will pull one T-loop through
the slot.)

• Repeat this procedure to assemble the other short seat

belt strap to the seat.

Battery
Compartment

Holes

Round Snaps

Hood

• Lower the hood, making sure to align the round snaps

on the underside of the hood with the holes near the
battery compartment.

• Press firmly on the top of the hood above each snap

to fasten the hood. (To open the hood, please see the
instructions on page 18, step 1.)

• Remove the backing from the wire clip. Dispose of the

backing properly.

• Press the wire clip into place in the battery compartment,

as shown.

• Fit the motor harness wires into the wire clip, as shown.

Battery
Compartment

Wire Clip

Motor
Harness
Wires