Freecom Technologies IEEE 1394 User Manual

Page 11

8. To complete the installation click on Finish.
9. At the end, Windows 2000 installs the floppy driver(s) and asks to restart the

computer. Confirm with Yes.

2.5 FREECOM Cable II IEEE 1394 installation under Windows 98 SE /

Windows ME

Note: IEEE 1394 is only supported by Windows 98 SECOND EDITION (and

above). If you are using an older version, you must first update Windows.

1. The driver database is loaded automatically after you have connected the

FREECOM Cable II IEEE 1394 to the PC.

2. Now place the "Windows 98 Installation CD" in your internal CD-ROM drive.
3. The "Hardware assistant" window appears on the screen. Click on "Next".
4. Select the item "Search for the best driver for the device" (Recommended) and

confirm with "Next".

5. The CD-ROM drive for the "Windows 98 Installation CD" driver installation is

dialed in the next window. If the search in the CD-ROM drive has not yet been

activated, you should dial this point. Confirm with Next".

6. The next window shows the driver file found on the CD-ROM. Confirm with

Next".

7. Click on "Finish" in the next window.
8. In order for the changes to take effect, you must restart your computer.

Note: You can plug the drive in and unplug it at the FireWire port while

the PC is running. The drive will be recognized automatically under "My

Computer" when it is reconnected ("hot plug & play").

2.6 FREECOM Cable II IEEE 1394 installation under Windows 2000

(First Installation)

The required driver is automatically installed once the FREECOM Cable II IEEE 1394

has been inserted and it is immediately allocated a drive letter.

Driver installation for PC