FUJITSU SERVIS KVM USB Emulation FS-1108AU/FS1108MU - Manual (Page 40)

3 7
iv. Registering and changing the server name
(1) Use the console key to register the server name and to change the ports.
(2) Press .
(3) The character string becomes yellow and the mode changes to the server name
input mode.
(4) Enter the server name on the keyboard and press to register or change
the name.
Pressing deletes one character, and pressing goes back one space.
When is pressed, input is canceled and the screen that was displayed
before registering or changing the server name is returned to.
Up to 17 characters can be entered for a server name.
The following 46 characters can be used to register a server name:
ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890,./[]:+×- and spaces.
In the server name input mode, press + to copy a server name and
press + to paste the copied server name.
(5) The following keyboard operations can be used to return the server names to their
factory settings.
- Press the left key + the right key + at the same time while
the OSD is displayed
- Press the right key + the left key + at the same time while
the OSD is displayed
Note: When a cascade connection is used, the above information is registered on the
master side.